We started our 4th week design and build the circuits with the given discharge models , we also substitute for a higher frequency generator which is up to 15Mhz to test the circuits that we build before. The result is as same as we did with 1MHZ frequency. Additionally, we calculated the load resistance and then test the circuits
with L, pi, LCC and T network.
Discharge models
In the process of calculating the result, there is one problem, because
the limitation
of components(the value is too big that we
cannot find), we only test the L type of circuit for the level 1 load and L,LCC
circuit for the level 2 load.
In the morning,
we got the new generator from the tutor, which maximum frequency is 15Mhz. Then
we rebuild the circuits that we tested
last before, and used new generator to test the behavior of the circuits with
higher
frequency. After testing the circuits we
build last week, we started to test the circuits with new model. In the process of testing, we add the inductor
to replace imagine part in
the calculation to test the difference when there
is no inductor added.
L circuit
retesting the L circuit before with higher frequency
LCC circuit with level 2 load
testing LCC circuit with level 2 load
No comments:
Post a Comment